電機工程學系

Permanent URI for this communityhttp://rportal.lib.ntnu.edu.tw/handle/20.500.12235/85

歷史沿革

本系成立宗旨在整合電子、電機、資訊、控制等多學門之工程技術,以培養跨領域具系統整合能力之電機電子科技人才為目標,同時配合產業界需求、支援國家重點科技發展,以「系統晶片」、「多媒體與通訊」、與「智慧型控制與機器人」等三大領域為核心發展方向,期望藉由學術創新引領產業發展,全力培養能直接投入電機電子產業之高級技術人才,厚植本國科技產業之競爭實力。

本系肇始於民國92年籌設之「應用電子科技研究所」,經一年籌劃,於民國93年8月正式成立,開始招收碩士班研究生,以培養具備理論、實務能力之高階電機電子科技人才為目標。民國96年8月「應用電子科技學系」成立,招收學士班學生,同時間,系所合一為「應用電子科技學系」。民國103年8月更名為「電機工程學系」,民國107年電機工程學系博士班成立,完備從大學部到博士班之學制規模,進一步擴展與深化本系的教學與研究能量。

News

Browse

Search Results

Now showing 1 - 1 of 1
  • Item
    Suitability of Redesigned Digital Control Systems Having an Interval Plant via an Evolutionary Approach
    (American Society of Mechanical Engineers, 2011-04-01) Chen-Chien Hsu; Tsung-Chi Lu
    In this paper, a quantitative index is proposed to address the performance evaluation and design issues in the digital redesign of continuous-time interval systems. From the perspective of signal energy, a worst-case energy resemblance index (WERI), defined as the ratio of the worst-case continuous signal energy (WCSE) of the continuous-time interval system over the worst-case discrete sequence energy (WDSE) of the redesigned digital system, is established for evaluating the closeness of the system performance between the redesigned digital control system and its continuous-time counterpart. Based on the WERI, performance of the redesigned digital systems can be evaluated for different discretization methods at different sampling times. It is found that no discretization method outperforms the others for all sampling times. Because of serious nonlinearities and nonconvexity involved, the determination of WCSE and WDSE is first formulated as an optimization problem and subsequently solved via an evolutionary algorithm. To guarantee stability of the redesigned digital system, the largest sampling time allowed is also evolutionarily determined to establish a sampling-time constraint under which robust Schur stability of the redesigned digital system can be ensured. For design purposes, sampling time required can be determined according to the user-specified WERI, which serves as a performance specification for fine tuning the performance of the redesigned digital control system.