電機工程學系
Permanent URI for this communityhttp://rportal.lib.ntnu.edu.tw/handle/20.500.12235/85
歷史沿革
本系成立宗旨在整合電子、電機、資訊、控制等多學門之工程技術，以培養跨領域具系統整合能力之電機電子科技人才為目標，同時配合產業界需求、支援國家重點科技發展，以「系統晶片」、「多媒體與通訊」、與「智慧型控制與機器人」等三大領域為核心發展方向，期望藉由學術創新引領產業發展，全力培養能直接投入電機電子產業之高級技術人才，厚植本國科技產業之競爭實力。
本系肇始於民國92年籌設之「應用電子科技研究所」，經一年籌劃，於民國93年8月正式成立，開始招收碩士班研究生，以培養具備理論、實務能力之高階電機電子科技人才為目標。民國96年8月「應用電子科技學系」成立，招收學士班學生，同時間，系所合一為「應用電子科技學系」。民國103年8月更名為「電機工程學系」，民國107年電機工程學系博士班成立，完備從大學部到博士班之學制規模，進一步擴展與深化本系的教學與研究能量。
News
Browse
3 results
Search Results
Item A compact 35-65 GHz up-conversion mixer with integrated broadband transformers in 0.18-μm SiGe BiCMOS technology(2006-06-01) Ping-Chen Huang; Ren-Chieh Liu; Jeng-Han Tsai; Hong-Yeh Chang; Huei Wang; John Yeh,Chwan-Ying Lee; John ChernThis paper presents a compact 35-65 GHz Gilbert cell up-convert mixer implemented in TSMC 0.18- ȝm SiGe BiCMOS technology. Integrated broadband transformers and meandered thin-film microstrip lines were utilized to achieve a miniature chip area of 0.6 mm × 0.45 mm. The compact MMIC has a flat measured conversion loss of 7 ± 1.5 dB and LO suppression of more than 40 dB at the RF port from 35 to 65 GHz. The power consumption is 14 mW from a 4-V supply. This is a fully integrated millimeterwave active mixer that has the smallest chip area ever reported, and also the highest operation frequency among up-conversion mixers using silicon-based technology.Item Design and analysis of a 44-GHz MMIC low-loss built-in linearizer for high-linearity medium power amplifiers(IEEE Microwave Theory and Techniques Society, 2006-06-01) Jeng-Han Tsai; Hong-Yeh Chang; Pei-Si Wu; Yi-Lin. Lee; Tian-Wei Huang; Huei WangA 44-GHz monolithic microwave integrated circuit (MMIC) low-loss built-in linearizer using a shunt cold-mode high-electron mobility transistor (HEMT), based on the predistortion techniques, is presented in this paper. The proposed cold-mode HEMT linearizer can enhance the linearity of the power amplifier (PA) with a low insertion loss (IL<2 dB), a compact die-size, and no additional dc power consumption. These advantages make the linearizer more suitable for millimeter-wave (MMW) applications. The physical mechanism of the gain expansion characteristics of the proposed linearizer is analyzed. A systematic design procedure for a low-loss linearizer is developed, which includes: 1) insertion loss minimization through a device-size selection and 2) linearity optimization through a two-tone test. To demonstrate the general usefulness of the proposed linearizer, the linearizer was applied to a two-stage 44-GHz MMIC medium PA and a commercial MMW PA module. After linearization, the output spectrum regrowth is suppressed by 7-9 dB. To keep the adjacent channel power ratio below -40 dBc, the output power has been doubled from 15 to 18 dBm at 44 GHz. The error vector magnitude of the 16-quadrature amplitude modulation signal can be reduced from 6.11% to 3.87% after linearization. To the best of our knowledge, this is the first multistage MMW PA with a low-loss built-in linearizerItem A W-band high-power predistorted direct-conversion digital modulator for transmitter applications(IEEE Microwave Theory and Techniques Society, 2005-09-01) Hong-Yeh Chang; Jeng-Han Tsai; Tian-Wei Huang; Huei Wang; Yongxiang Xia; Yonghui ShuThis letter presents a W-band high-power direct-conversion transmitter using digital predistortion techniques for digital modulation applications. The transmitter is a direct-conversion configuration that employs a reflection-type IQ modulator module and a power amplifier module. With the predistortion function in digital signal processing (DSP), this transmitter demonstrated an output channel power of greater than 19 dBm, and the adjacent channel power ratio (ACPR) was improved by 10 and 18 dB for QPSK and π/4-DQPSK modulation, respectively. To the best of our knowledge, this is the first demonstration of linearization techniques for W-band high-power digital modulation transmitters.