教師著作

Permanent URI for this collectionhttp://rportal.lib.ntnu.edu.tw/handle/20.500.12235/31266

Browse

Has files: NoSubject: search.filters.subject.Hole-Blocking Layer HBL

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Efficiency Improvement of Organic Light Emitting Diodes with Co-Deposited Hole Blocking Layer
    (Trans Tech Publications, 2010-04-01) Liu, C. H.; Tesng, C. H.; Cheng, C. P.
    There are several kinds of methods in improving the efficiency of organic light emitting diodes (OLEDs). In this work, we used a co-deposited hole blocking layer to improve the efficiency of OLEDs. The structure of the component is: ITO/ MTDATA(15 nm) /NPB(40 nm) /BCP(10 nm) /BCP: Alq(15 nm) /LiF(0.7 nm)/ Al(180 nm). We changed the mixing rate of the BCP:Alq layer to be capable of hole blocking and electron transporting, and then improved the efficiency of OLEDs. Finally, we prepared white light OLED with doping Rubrene in NPB. When the concentration of the NPB: Rubrene layer was 2.0 wt.%, the device could emit the white light at 100 mA/cm2, and the luminance was above 2300 cd/m2, and the color coordinate was x = 0.36, y = 0.37.
  • No Thumbnail Available
    Item
    Influences of Dye Doping and Hole Blocking Layer Insertion on OLED Performance
    (Trans Tech Publications, 2010-04-01) Tesng, C. H.; Liu, C. H.; Cheng, C. P.
    This study presents the influences of dye doping and hole blocking layer insertion on the electroluminescent properties of the blue organic light emitting diode. The luminance of the device was significantly improved by BCzVB doping because of the utilization of effective F顤ster energy transfer and the improvement of carrier injection and trapping; a BCzVB dominant emission was observed. Furthermore, when a BCP layer was inserted between the TBADN:BCzVB and Alq3 layers, a thin BCP layer insertion enhanced the injection of electrons and improved the luminance of the device. In contrast, a thick BCP layer insertion caused a delay in electron transport, resulting in a decrease in current density and a deterioration in luminance.